what is oil pressure / radio connected to?
what is oil pressure / radio connected to?
dropped clutch in, now neither are working.
i just pulled an all nighter so i cant think straight why this would happen. i must have missed a ground somewhere?
ill check back in a couple hours after a small nap
i just pulled an all nighter so i cant think straight why this would happen. i must have missed a ground somewhere?
ill check back in a couple hours after a small nap
Oil pressure gauge is one of two things. First, the wire that goes to the sender may have popped off. The sender is just below the oil filter, and looks like a mushroom growing out of the engine. The wire clips onto the top of it.
The other thing is there's a small black "box" (small as in 1"x1") that attaches to one of the slave cylinder bolts. The box actually a ground for the oil pressure gauge - if this is disconnected, you'll have flaky oil pressure readings. Just follow along the wiring harness over in that area and you should find it dangling. Remove the lower 12mm bolt holding the slave in, put the bolt through the hole on the box ground, and reattach.
As far as the stereo, I'd check fuses.
Dale
The other thing is there's a small black "box" (small as in 1"x1") that attaches to one of the slave cylinder bolts. The box actually a ground for the oil pressure gauge - if this is disconnected, you'll have flaky oil pressure readings. Just follow along the wiring harness over in that area and you should find it dangling. Remove the lower 12mm bolt holding the slave in, put the bolt through the hole on the box ground, and reattach.
As far as the stereo, I'd check fuses.
Dale
Thread
Thread Starter
Forum
Replies
Last Post






