mazda90mx6

iTrader: (2)

Like the subject says what injectors are you running

mazda90mx6

iTrader: (2)

it is for a TII i am looking at something around 740cc/min

Scott 89t2

you can buy 720cc injectors at lots of places for around $100 each.

I'm running stock

madaz07

stock injecters and fuel pump but i want to upgrade them

fasthack

if you are looking to find out what you should run, you should include your mods on your car because that is what will decide what you should run.....
i'm running stock primaries and 1600 cc secondaries....

BDC

I run 720's in the primaries and 1600's in the secondaries. Only do this with a standalone EFI system and not the stock setup.

B

1987RX7guy

iTrader: (3)

460's woo woo!

takerwolf

I got my new secondaries from Marren and the top has a double o-ring instead of the factory grommet and the bottom a larger o-ring not a doughnut. They asked me if it was a doughnut or not. Any idea if this will work like that or with the factroy doughnuts and top thing? (got extra new ones)

krieger9

yah i got my injectors from marren too, 550 stock primarys and 1008 cc secondaries from them they also hooked me up with fuel pressure regulator for pretty cheap

FC Drifter

i run stock 550 primaries and 720 secondaries. its a good setup for a mildly tuned car(ie full exhaust, intake, boost controler, and intercooler) along with a good fuel pump.

Infini IV

550cc primaries (cleaned & balanced by RC, and came out to be 560cc)

1000cc secondaries