I just got done swapping out the my TII engine for another one


There is a hardline on the firewall. There are 4 total, 2 small ones and 2 bigger ones. The lower large line runs from the pass side of the firewall to the drivers side, then has a hose coming off of it.

What is that hose for and where does it go? The only vacuum port i see thats even close to it is the one at the base of the oil neck on the iron?

Thanks for the help rexClub

 

Comes from the charcoal canistor?

Probably connects to the port on the oil fill tube.

 

im not sure where its going.. it goes to the pass side right behind the abs unit and then i loose track of it "i have a plate bolted up over there that holds my sbc, evc and fbcd.. so i haven't pulled it out to look under..

 

It's emissions related.


-Ted

 

so its safe to assume that i can just pull it off? good deal...

 

You also have brake lines, brake booster line and the return for the canister.

 

well i know that some are for the brakes, im just curious about the lower large line that has a hose coming off it.. Im not gonna pull the actualy brake lines..

 

Um, why don't you just trace it?

There's a short "pipe" that does eventually go to the brake booster - is that the one you're talking about?


-Ted