buddy of mine picked up sn s4 na engine and has a roller with a tii trans 5spd s4
in what would you need to make it work
somebody told me a racing beat flywheel would allow it to work is there anything else we need

 

You'd need a turbo flywheel and turbo starter. The na flywheel and starter are a no go. Starter bolt patterns are upside down backwards vs the na.

 

na clutch wiil work or will i need a turbo clutch

 

You will also need a custom driveshaft to mate it to the NA diff, or a turbo diff.
Not sure about the clutch, but I think you need a turbo clutch.

 

Turbo Flywheel
Turbo Clutch and PP (Maybe Mazdatrix has a N/A to Turbo thing) (215mm to 225 or something like that)
Turbo Starter
Mazdatrx Turbo Trans to N/A diff. (Roller may have this? or is it a turbo Roller?)
Turbo Clutch Slave Cylinder

 

The Car Has A Turboii Rear End, I Am Assuming Thats Ok??

 

Should be ok.

 

It means you don't need the drive shaft since its probably already connected.

So you need a TII Flywheel, clutch, PP, starter, and clutch slave cylinder.

 

thanks