View Poll Results: what clutch do you have, and why?
Voters: 50. You may not vote on this poll
what clutch are you using and why?
My buddy has a "Exedy Hyper Single Clutch" in his turbo II we just built. Streetport 13BT with a BNR stage 3 and it holds it great. The pedal pressure feels stiffer than my stock clutch but is definitely a lot stronger. We called Exedy and they told us it should be able to hold up to about 350ft/lbs of torque out of a rotary.
I also have a stock Exedy replacement kit in my car.
Would definitely recommend a Exedy to anyone in the market for a new clutch.
I also have a stock Exedy replacement kit in my car.
Would definitely recommend a Exedy to anyone in the market for a new clutch.
And the weird thing is I can dump it in second and still spin the tires with no slippage woot
Full Member
Joined: Sep 2008
Posts: 83
Likes: 0
From: The Netherlands
ACT street. First I had it on an MX-3. Worked great, cheaper then oem, but better pedal feel and stronger. Bought the RX-7 with a worn clutch, so replaced it with an ACT street as well, great clutch kit 
Rotary Enthusiast
Joined: Dec 2006
Posts: 918
Likes: 1
From: Rockford, IL
Excedy Hyper Puck twin disc clutch (unsprung and Extremely over kill lol)
Its kind of hard to start off from a stop but it came with my engine and tranny from Japan. My tuner guy said that the clutch is the reason why my tranny is grinding in 3rd gear. I'm not going to bother replacing it though until one or the other goes out.
Its kind of hard to start off from a stop but it came with my engine and tranny from Japan. My tuner guy said that the clutch is the reason why my tranny is grinding in 3rd gear. I'm not going to bother replacing it though until one or the other goes out.
Thread
Thread Starter
Forum
Replies
Last Post
