What can i do to fix? help is much appreciated
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: B.c Canada
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
What can i do to fix? help is much appreciated
Hey guys, Here's the problem. I went out of the country for a couple months and i left my cars in care of a friend... anyways long story short car is a 90 Na/t2 A hose busted while driving oil sprayed everywhere, instead of having car towed home, tried driving it. car completely locked up and then wouldnt turn over again... hose was replaced but engine still wont crank. Is the motor done? is there anything that can fix this problem without dumping huge amounts of money at it again?
I've tried searching and i cannot find anything. Any help or similar experience would be greatly appreciated. Thank you again.
is there any chance that the motor can be turned with wrench or impact wrench or is that a completely different scenario all together?
I've tried searching and i cannot find anything. Any help or similar experience would be greatly appreciated. Thank you again.
is there any chance that the motor can be turned with wrench or impact wrench or is that a completely different scenario all together?
Last edited by JMIce; 11-08-08 at 02:17 PM.
#4
Junior Member
Thread Starter
Join Date: Sep 2005
Location: B.c Canada
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
Devon300zx
2nd Generation Specific (1986-1992)
15
09-16-15 06:57 AM