hey guys before anyone starts to flame me. i have done a search and couldnt find what i was looking for.

for the people that have/are running wet nitrous kits.. were did you pull your fuel from? what materials did you use?


thanks
billy

 

I ran it from my 10-AN fuel feed line from behind my secondary rail, before it went into the aeromotive fuel pressure regulator. I used a AN y-splitter off of the rail, and the fuel line went from there to the FPR. The fuel then goes to another splitter, to feed both fuel-sides of the stages.

Or, you could just tap into the banjo bolt end of the secondary rail ala FC3s.org.

My set=up is a little extensive... but hey, you asked.

 

thanks very much. i think im going to tap in to the banjo bolt.

later
billy

 

Anything else you need to know regarding installation, use, proper modifcations, or tuning, feel free to email me at shutup_billy@hotmail.com

(Yes, it is my actual email address. Your name just happens to be coincidental)