Weird Oil Leak
#1
I AM A THIEF!! READ THE FEEDBACK SECTION!
Thread Starter
Join Date: Aug 2002
Location: Miami, FL
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Weird Oil Leak
Ok well I have an oil leak, I just noticed a couple of days back and think I have pinpointed the source to the K&N oil filter, or right under, like if it was oozing out from uinder it, any ideas what could cause this?
#2
I AM A THIEF!! READ THE FEEDBACK SECTION!
Thread Starter
Join Date: Aug 2002
Location: Miami, FL
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Let me add the the filter is as old as the engine, which is about 500 miles old. (The car had this problem from the beginning of the rebuild but I wasn't able to pinpoint where)
#3
Rotary Enthusiast
iTrader: (9)
Join Date: Jun 2003
Location: west
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Check the oil filter pedestal. There are 2 o-rings between the block and it. It's a simple 2 10mm bolts.
Change them since they are hard as a rock if you still have the original engine.
Change them since they are hard as a rock if you still have the original engine.
#4
I AM A THIEF!! READ THE FEEDBACK SECTION!
Thread Starter
Join Date: Aug 2002
Location: Miami, FL
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
I have a rebuilt engine but that might not have been changed, basically all I changed were ALL of the internals and seals, ill check that out, thanks.
#5
I AM A THIEF!! READ THE FEEDBACK SECTION!
Thread Starter
Join Date: Aug 2002
Location: Miami, FL
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
I have a rebuilt engine but that might not have been changed, basically all I changed were ALL of the internals and seals, ill check that out, thanks.
#6
I AM A THIEF!! READ THE FEEDBACK SECTION!
Thread Starter
Join Date: Aug 2002
Location: Miami, FL
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
I have a rebuilt engine but that might not have been changed, basically all I changed were ALL of the internals and seals, ill check that out, thanks.
#7
I AM A THIEF!! READ THE FEEDBACK SECTION!
Thread Starter
Join Date: Aug 2002
Location: Miami, FL
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
I have a rebuilt engine but that might not have been changed, basically all I changed were ALL of the internals and seals, ill check that out, thanks.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
08-31-15 07:49 PM