Water Thermo Sensor
Thread Starter
Senior Member
Joined: Sep 2001
Posts: 378
Likes: 0
From: Western Massachusetts
Water Thermo Sensor
88 GXL N/A
I'm getting error code 3 "Water Thermo Sensor"
Would the sensor being bad cause the car not to run.
If so, is there a temporary work around?? Thanks.
LoS
I'm getting error code 3 "Water Thermo Sensor"
Would the sensor being bad cause the car not to run.
If so, is there a temporary work around?? Thanks.
LoS
Mod Powers...gone!
Joined: Apr 2001
Posts: 1,522
Likes: 1
From: SoCal
If that error code pulls up, it is one of two things.
1) The wire running to the sensor snapped. (Check this first)
2) The sensor is bad.
I noticed in your other thread, you indicated that the harnesss was "hacked up". Odds are, I would say that a wire is snapped. Check your connections.
1) The wire running to the sensor snapped. (Check this first)
2) The sensor is bad.
I noticed in your other thread, you indicated that the harnesss was "hacked up". Odds are, I would say that a wire is snapped. Check your connections.
Thread Starter
Senior Member
Joined: Sep 2001
Posts: 378
Likes: 0
From: Western Massachusetts
Well i checked the voltage between the two connections, and i was getting a ~5 volt reading. I did that because i didn't have time to remove the sensor. Hopefully today if the weather stays good i'll test the sensor.
Thx.
LoS
Thx.
LoS
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM
