So I got my walbro in the mail today and before i started tryign to do anything i read the directions, and the make everythign sound so damn complicated... "some vehicles this, most vehicles that, if your vehicle this... etc" so i was like WTF ill just pull my fuel pump out. It looked like its pretty straight foreward, so i wired it..on the top of the pump, I used the stock spacer, but i used the O-ring and Cap that they provided with the pump. (i lubed the O ring a little before i put it on) As for the rest of the wiring I wirhed the stock blue wire (which was + i believe) to the walbro red. and BOTH of he stock black wires, to the walbro black, as you can see in the picture...
I was wondering about the 3 holes that are in the 2nd picture; the two + and - holes between the plug and the fuel line, and the other hold sort of under the fuel line to the right. do i just leave those as is?
Lemme know if this looks to be correct.
Thx

*Edit: pics would help i suppose

 

Or, if you want a plug and play harness, buy it from rx7store.net.

 

Looks right if you have the wires on the way they were supposed to go on.

 

thx guys, it started right up, works like a frickin charm.

 

I was about to say just hook the shop vac up to it Post the VID!

But yeah, looks good.