I need a fuel pump to get my 88 fc turbo 2 running and I don't have one. I was wondering if the walbro fuel pump is a direct replacement for a stock one cause from the pictures on the walbro fuel pump and the stock one they look completely different. Is there some kind of modification to make it work?

 

drop in with a clamp holding it to the original pump holder. then rubber hose up to the top and connectors to the wiring. the sock shouldnt be an issue but will not use the stock FC pump sock

 

I run an FD one on my car. No problems there.

 

With a stock car and a Walbro 255lph fuel pump... You should use an adjustable fuel pressure regulator.

PM me if you want a used TII fuel pump.

 

buy the install kit, it comes with what you need including the sock

banzai on here sells them configured the way you need it

 

While you're at it... Look into rewiring your fuel pump.

Be sure to READ thoroughly.

https://www.rx7club.com/forum/showthread.php?t=789895

https://www.rx7club.com/showthread.p...el+pump+rewire

 

walbro is extremely easy to install. probably 20 min to install. Ive been running one for 2 years with no problems what so ever (fuel related anyway) with no adjustable regulator

 

ok, thanks guys. I'll look into everything you guys said.

 

Install kit includes the plug, sock ,hose, some clamps, etc