vipers engine build.... part 1... the parts.. "pics"
04-07-06, 02:11 AM
#1
vipers engine build.... part 1... the parts.. "pics"
alright.... well, ive been in the process of purchasing parts since late january..... and here is what i have so far...... im roughly halfway done, and will post pics of the other parts i get, and start a thread showing the full build-up.... im hoping for around 400-450rwhp......
heres the turbo.. its a master power t70 (turbine is being replaced w/ a devided 1.00 ar housing
the wastegate is a 50mm hks clone....... w/ dump tube
the manifold is a fd turbo header from xs power (quality is great, i bought the fc one orinally, but threw it away due to crappyness... this one is top notch)
and the microtech.... its an lt10s..what else can i say
heres the turbo.. its a master power t70 (turbine is being replaced w/ a devided 1.00 ar housing
the wastegate is a 50mm hks clone....... w/ dump tube
the manifold is a fd turbo header from xs power (quality is great, i bought the fc one orinally, but threw it away due to crappyness... this one is top notch)
and the microtech.... its an lt10s..what else can i say
04-07-06, 02:14 AM
#2
the fuel system......
walboro 255ltr.hr fuel pump
kgparts primary and secondary fuel rails
1000cc primary injectors
1680cc secondary injectors
aeromotive fuel pressure regulator
coolingmist alcohol injection system w/ clog nozzle and controller
walboro 255ltr.hr fuel pump
kgparts primary and secondary fuel rails
1000cc primary injectors
1680cc secondary injectors
aeromotive fuel pressure regulator
coolingmist alcohol injection system w/ clog nozzle and controller
04-07-06, 02:23 AM
#7
and hers my roll bar.....
heres a list of whats on the way in the mail, but hasnt arrived yet
-samco upper and lower radiator hoses (blue)
-apexi avc-r boost controller
and i have a full rhd front clip in my backyard...this is getting done at the same time my motor does
heres a list of whats on the way in the mail, but hasnt arrived yet
-samco upper and lower radiator hoses (blue)
-apexi avc-r boost controller
and i have a full rhd front clip in my backyard...this is getting done at the same time my motor does
Last edited by vipers; 04-07-06 at 02:27 AM.
Trending Topics
04-07-06, 08:12 AM
#16
(_8(|)
Join Date: Jul 2004
Location: Manhattan, Kansas
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
looks good man! Very similar to the parts that i am stock piling, xcept i have a diff turbo, manifold and smaller primary injectors. Best of luck!!!!!
Can you send me a pm on where you got the micro from and how much/items included with it etc, I want to get one but im looking for an alternate vendor than the one i had originally planned to purchase from.
thanks
Can you send me a pm on where you got the micro from and how much/items included with it etc, I want to get one but im looking for an alternate vendor than the one i had originally planned to purchase from.
thanks
04-07-06, 08:45 AM
#17
thats not an integra!
Join Date: Mar 2006
Location: Send you back to mother in a cardboard box
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vipers
black magic fan
koyo aluminum radiator
msd dis-2
full emissions block off plates
alternator relocation kit from pineapple racing
koyo aluminum radiator
msd dis-2
full emissions block off plates
alternator relocation kit from pineapple racing
pile of parts looks great
04-07-06, 10:16 AM
#19
I'm back Bishes
Join Date: Jan 2006
Location: Rhode Island
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
Man that is the way to go. Accumulate all of the parts then put that badboy together. A man after my own heart....I know it will look good. I am interested in learning about this msd dis-2 so whenever you get some time and if you don't mind pm me about it.
04-07-06, 11:29 AM
#21
Famous Phil's Cheesteaks
Join Date: Mar 2006
Location: Los Feliz/LA, CA
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rotorforce
Man that is the way to go. Accumulate all of the parts then put that badboy together. A man after my own heart....I know it will look good. I am interested in learning about this msd dis-2 so whenever you get some time and if you don't mind pm me about it.
sorry
04-07-06, 12:50 PM
#22
I'm back Bishes
Join Date: Jan 2006
Location: Rhode Island
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RenofHeavens
Freda Feltcher? From Cranston?
sorry
sorry
Funny as **** but yeah I'm from that Cranston
04-07-06, 12:53 PM
#23
No more 7 or 8
iTrader: (3)
Join Date: Jun 2004
Location: San Bernardino - So Cal
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
pretty cool to see all the parts together on one page.
I keep telling you "she is gona be a monster!"
nad a perdy one at that.
you need to hury ap and get that thing together so you can stop showing up to the meets in a Hyundi! we miss seeing the sevent here.
you also need to get it together so you can come to the autocross with us. I would not mind seeing that car run some times. your gonna be all over the place with that much power. he he he. your gonna have to let me drive it.
I keep telling you "she is gona be a monster!"
nad a perdy one at that.you need to hury ap and get that thing together so you can stop showing up to the meets in a Hyundi! we miss seeing the sevent here.
you also need to get it together so you can come to the autocross with us. I would not mind seeing that car run some times. your gonna be all over the place with that much power.
he he he. your gonna have to let me drive it.
04-07-06, 01:15 PM
#24
Originally Posted by Wankel7
Why did you choose RA over OEM?
James
James
Originally Posted by eastcoastdrift
Where did you aquire those fuel rails from?
Originally Posted by kruthles
Any info where you picked up the emissions block off plates?
pile of parts looks great
pile of parts looks great
and to everyone else that posted.....thanx alot! i apriciate the compliments..... i havnt had any money for the past few months, and it was starting to wear me out.... but im all pumped again...lol.....
