vipers engine build.... part 1... the parts.. "pics"
5 Attachment(s)
alright.... well, ive been in the process of purchasing parts since late january..... and here is what i have so far...... im roughly halfway done, and will post pics of the other parts i get, and start a thread showing the full build-up.... im hoping for around 400-450rwhp......
heres the turbo.. its a master power t70 (turbine is being replaced w/ a devided 1.00 ar housing the wastegate is a 50mm hks clone....... w/ dump tube the manifold is a fd turbo header from xs power (quality is great, i bought the fc one orinally, but threw it away due to crappyness... this one is top notch) and the microtech.... its an lt10s..what else can i say |
5 Attachment(s)
the fuel system......
walboro 255ltr.hr fuel pump kgparts primary and secondary fuel rails 1000cc primary injectors 1680cc secondary injectors aeromotive fuel pressure regulator coolingmist alcohol injection system w/ clog nozzle and controller |
5 Attachment(s)
black magic fan
koyo aluminum radiator msd dis-2 full emissions block off plates alternator relocation kit from pineapple racing |
5 Attachment(s)
centerforce dual friction clutch kit
brand new (not reman.) slave cylinder and clutch master cylinder stainless steel clutch line pineapple racing aluminum oil pan greddy oil filter relocation kit |
5 Attachment(s)
ported throttle body by reted
godspeed intercooler 24x12x3 full oem gasket kit all new internals for motor (rotary aviation 2mm 2 peice seals, fd corner springs, solid coner seals, etc) thermal pellet dual hks ssqv clone bov's |
looks like fun
|
1 Attachment(s)
and hers my roll bar.....
heres a list of whats on the way in the mail, but hasnt arrived yet -samco upper and lower radiator hoses (blue) -apexi avc-r boost controller and i have a full rhd front clip in my backyard...this is getting done at the same time my motor does |
i am hating Jesse but more power to ya bro cant wait to see it in july bro
|
thanx man....... yeah, i mainly posted em' so you could see everything!:) but i figured people might get a kick out of all this crap!
|
so are you doing a RHD swap? is that what the clip is for?
|
Originally Posted by staticguitar313
so are you doing a RHD swap? is that what the clip is for?
|
Why did you choose RA over OEM?
James |
Where did you aquire those fuel rails from?
|
Originally Posted by Wankel7
Why did you choose RA over OEM?
James |
my two favourite words...among others....
stock pile - hehe good luck with the project!! |
looks good man! Very similar to the parts that i am stock piling, xcept i have a diff turbo, manifold and smaller primary injectors. Best of luck!!!!!
Can you send me a pm on where you got the micro from and how much/items included with it etc, I want to get one but im looking for an alternate vendor than the one i had originally planned to purchase from. thanks |
Originally Posted by vipers
black magic fan
koyo aluminum radiator msd dis-2 full emissions block off plates alternator relocation kit from pineapple racing pile of parts looks great :bigthumb: |
Looks like a great setup! Can't wait to see the finished product!
Keep us posted |
Man that is the way to go. Accumulate all of the parts then put that badboy together. A man after my own heart....I know it will look good. I am interested in learning about this msd dis-2 so whenever you get some time and if you don't mind pm me about it.
|
Damn Jesse, that's a lot of stuff!
Can't wait to see the finished product in July... |
Originally Posted by rotorforce
Man that is the way to go. Accumulate all of the parts then put that badboy together. A man after my own heart....I know it will look good. I am interested in learning about this msd dis-2 so whenever you get some time and if you don't mind pm me about it.
sorry |
Originally Posted by RenofHeavens
Freda Feltcher? From Cranston? :molepoke:
sorry Funny as shit but yeah I'm from that Cranston |
pretty cool to see all the parts together on one page.
I keep telling you "she is gona be a monster!" :) nad a perdy one at that. you need to hury ap and get that thing together so you can stop showing up to the meets in a Hyundi! we miss seeing the sevent here. you also need to get it together so you can come to the autocross with us. I would not mind seeing that car run some times. your gonna be all over the place with that much power. :) he he he. your gonna have to let me drive it. |
Originally Posted by Wankel7
Why did you choose RA over OEM?
James
Originally Posted by eastcoastdrift
Where did you aquire those fuel rails from?
Originally Posted by kruthles
Any info where you picked up the emissions block off plates?
pile of parts looks great :bigthumb: and to everyone else that posted.....thanx alot! i apriciate the compliments..... i havnt had any money for the past few months, and it was starting to wear me out.... but im all pumped again...lol..... |
Very nice!!
|
All times are GMT -5. The time now is 06:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands