2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

vert top won't work.

Thread Tools
 
Search this Thread
 
Old May 28, 2006 | 09:50 AM
  #1  
azkickr's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Mar 2004
Posts: 77
Likes: 0
From: sc
vert top won't work.

It worked fine a couple weeks ago. I let it down and left it down since it sits in the garage ecept on sunny days. But the other day I was planning on taking it to the track but it wouldn't go up. It doesn't even beep. What should I check?
Reply
Old May 28, 2006 | 11:07 AM
  #2  
13bturbofc's Avatar
mmm doritos
Tenured Member: 15 Years
iTrader: (4)
 
Joined: Apr 2006
Posts: 2,107
Likes: 0
From: lancaster PA
im pretty sure there is a fuse for the motors check and see if its blown....
Reply
Old May 28, 2006 | 11:51 AM
  #3  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
is the parking brake on???

do you get the beeps when the switch is activated???

Have you checked the top diagnositc plug to se if it works there?
Reply
Old May 28, 2006 | 01:26 PM
  #4  
azkickr's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Mar 2004
Posts: 77
Likes: 0
From: sc
There's a fuse in that grey box under the spare tire cover but it's good.

Yes, the parking brake is on.
No, it doesn't beep when the switch is activated.
I have no idea where the top diagnostic plug is. I didn't know it had one. Could you elaborate on the location?
Reply
Old May 28, 2006 | 09:24 PM
  #5  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Diagnostic plug is on the passengers strut tower.

It contains the wires for raising and lowering the top as well as the fused ignition source.
Reply
Old Jun 11, 2006 | 08:32 AM
  #6  
azkickr's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Mar 2004
Posts: 77
Likes: 0
From: sc
Is there a way to manually raise the top so I can check it?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
whinin
Introduce yourself
17
Mar 30, 2019 07:53 PM
MazdaspeedR1
The Bad & Fugly Businesses
27
May 22, 2018 05:58 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 03:08 PM.