vacuum hoses
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: Buford, GA
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
vacuum hoses
Well I am trying to put my manifold (both upper and lower) back no now. I am having trouble finding where all the vacuum hoses go. Does anyone here have a good diagram? I searched but the search for this site was not working.
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
That first picture stumped me for a while. It looked like the nipple was coming out of that hose. But no. That nipple goes to your boost/pressure sensor. This cars funny, strange. In the same pic, the two nipples with black caps on them should have vac hoses. You should find two metal vac lines coming around the back of the engine, one above the other. The top one goes to the fwd black cap and the bottom one goes to the rear black cap. The fwd black cap goes eventually the SWITCHING SOLENOID(GREY) and the rear goes to the RELIEF SOLENOID(BLUE). EUREKA! The second picture explains what I said just above. I now see the two metal vac lines that should have hoses going to the two black caps in the first picture. The third picture is a puzzle right now. The forth picture is too easy. Should have a large black hose on it that twists a bit , maybe a foot long, and goes to the very large black duck b/t the throttle body and the air flow meter. There sh0uld be a plastic union on the bottom of the large duct for the approx one inch hose to connect to.
Last edited by HAILERS; 03-16-02 at 12:58 PM.
#4
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Is the third picture showing the opening I have circled in red in this picture?????? If it is, there should be a one inch approx hose from there going fwd to a SILENCer in the front fender(hidden).
#6
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
This url picture helps if you stare at the small blue lines. It explains the first picture you had.http://home.earthlink.net/~burntoast...o_injector.jpg
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM