2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Vacuum Hose Question

Thread Tools
 
Search this Thread
 
Old Nov 23, 2003 | 02:44 AM
  #1  
j200pruf's Avatar
Thread Starter
RIP Icemark
Tenured Member 05 Years
iTrader: (4)
 
Joined: Oct 2002
Posts: 1,481
Likes: 1
From: Aloha OR
Vacuum Hose Question

I am having a bit of trouble finding where this vacuum hose is supposed to go (My car is a S4 N/A). On the front of the Dynamic Chamber there are three vacuum nipples. I know that the large one goes to the oil lines, and that the bottom one goes to the vac rac, but where the hell does the middle one go (its the middle one when looking at the FSM). The FSM pic has it going by the Sub-zero start thing, but the LIM is blocking it in teh drawing, is it for the Sub-zero start? Does anyone know, cuz I have to put the car back together by tomorrow before I go to work so that my dad will help me tow start it.

Last edited by j200pruf; Nov 23, 2003 at 02:47 AM.
Reply
Old Nov 23, 2003 | 12:41 PM
  #2  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
That one goes to a nipple that is located b/t the two oil injector nozzles on the manifold. The two oil injector nozzles that are within a few inches of each other. It's for primay fuel injector bleed air. Ii's a good idea to keep this vac hose in place.
Reply
Old Nov 23, 2003 | 01:20 PM
  #3  
j200pruf's Avatar
Thread Starter
RIP Icemark
Tenured Member 05 Years
iTrader: (4)
 
Joined: Oct 2002
Posts: 1,481
Likes: 1
From: Aloha OR
So it does go to the nipple on the LIM. Alright, thanks hailers.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 08:25 PM.