Turn Signal
#1
Junior Member
Thread Starter
Join Date: Oct 2001
Location: LANCASTER PA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Turn Signal
O.k over the last week or two my left turn signal has grown a mind if it's own.It would work then it wouldn't.Now it just don't work at all.the right one works fine.I checked all bulbs and they are fine.My running light's work as well.When i have the left turn signal on i can here the flasher click but i get nothing,the rear turn signal bulb does not even come on.I am stumped any advice.thanks tom
#3
Easy to diagnose: take a multimeter, and turn on signal. Measure voltage at the bulb. If there is voltage, it is the bulb. If there is no voltage, then check voltage at end-pins of switch (must take off cluster, but this is fairly easy). If there is voltage, then its the fuse (generic lights, dont remember code and placement). If there is no voltage, then its the switch.
Since you say you can hear the "click-click" of the circuit, then its probably some fuse....
Thats my take....
Since you say you can hear the "click-click" of the circuit, then its probably some fuse....
Thats my take....
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
Farkel
3rd Generation Specific (1993-2002)
4
09-16-15 06:16 PM