turboing a n/a
#1
Drift Heaven
Thread Starter
Join Date: Mar 2008
Location: Oregon
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
turboing a n/a
I am turboing my 86 rx7. I have the manifold and a stock sized turbo. Where should i tap for oil and what else should i do. Also what are the potential risks involved. It will primarily be at a low boost (4-6lbs.). What size exausht would be good for it? i was told 3.5" or 4" would be good but i am not sure.
#2
Marvelous Hedonist
Join Date: Oct 2007
Location: Old-Town BrightTown, CO
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
#3
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
For 4-6 PSI its not worth it.
The link posted above is a log of the entire project. It's good reading, but probably not the best to answer the question.
The link for specific information on turbocharging the NA is this:
http://www.aaroncake.net/rx-7/naturbo.htm
Also, the 2nd gen FAQ contains a lot more turbo-NA links and is the first place that should be checked before asking a question.
The link posted above is a log of the entire project. It's good reading, but probably not the best to answer the question.
The link for specific information on turbocharging the NA is this:
http://www.aaroncake.net/rx-7/naturbo.htm
Also, the 2nd gen FAQ contains a lot more turbo-NA links and is the first place that should be checked before asking a question.
Thread
Thread Starter
Forum
Replies
Last Post
rxmiles
3rd Generation Specific (1993-2002)
9
08-24-15 02:07 PM