TurboII clutch on a Non-turbo?
#1
SCCA Rookie
Thread Starter
Join Date: May 2001
Location: Sterling Heights, MI
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
TurboII clutch on a Non-turbo?
I have an '87 TurboII with a strong clutch on it, and an '87 base N/A with a "on its way out" clutch on it.
Can it be swapped over? What are the differences between the two if they can or can't?
I saw that the N/A are 225 mm, and the Turbo are 240mm (S4) or 235 mm (S5), but the 240mm/235mm are interchangable supposedly.
Can it be swapped over? What are the differences between the two if they can or can't?
I saw that the N/A are 225 mm, and the Turbo are 240mm (S4) or 235 mm (S5), but the 240mm/235mm are interchangable supposedly.
Last edited by Barwick; 05-20-04 at 09:10 AM.
#3
SCCA Rookie
Thread Starter
Join Date: May 2001
Location: Sterling Heights, MI
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
So the splines are definitely different?
I'm going to be swapping the entire drivetrain over eventually, but right now I don't have a TurboII transmission that doesn't suck. The previous owner swears the transmission in it is a T5 or something, but I don't know, I haven't been able to pull it & check. But at any rate it sucks.
I'm going to be swapping the entire drivetrain over eventually, but right now I don't have a TurboII transmission that doesn't suck. The previous owner swears the transmission in it is a T5 or something, but I don't know, I haven't been able to pull it & check. But at any rate it sucks.