Turbo Timer works, but still no gauge lights
#1
Full Member
Thread Starter
Join Date: May 2003
Location: Kalamazoo Michigan
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Timer works, but still no gauge lights
I am still stumped on the issue of my gauge lights. It might be the relay, but i am not sure how to check that. I know the fuse isn't blown, and the part of the harness that goes into the cluster its self isn't getting power, so its either the relay or there is a short in the wiring. Any one got any ideas?
#2
Ive never heard of that happening. Electrical stuff pisses me off. Have you checked the ECU? Checked the signal going into the relay? I don't know..... Any electrical gurus wanna tackle this one?
#3
Former Moderator. RIP Icemark.
There is no relay for the gauge lights. There is only the output from the light switch.
Have you checked the light switch yet???
Did you search?
Have you checked the light switch yet???
Did you search?
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM