turbo swap questions
#1
Rpm abuser
Thread Starter
Join Date: Oct 2003
Location: New Port Richey, FL
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
turbo swap questions
1. the tubes that come out of the fire wall, theres three of them towards the passenger side. i assume these go to the radiator some how, i dont knwo where it goes. does anyone have a pic of these tubes is on there firewall, and where they go.
2. the switching actuator, how do i hook that up when i take off all emmissions. if i need the valve, i kept it just in case.
3. throttle body. what hooks up to it. i have the cables hookd up, but what are the tube ports for? vaccum? or maybe coolant. i
if any one could point me to a map of how my coolant is set up it will be great.
i found the map of how the vaccum is setup, so i dont need that. maybe a description of where the coolant goes. thanx
PS i have a 87 base with a 88 turbo setup. thanx
2. the switching actuator, how do i hook that up when i take off all emmissions. if i need the valve, i kept it just in case.
3. throttle body. what hooks up to it. i have the cables hookd up, but what are the tube ports for? vaccum? or maybe coolant. i
if any one could point me to a map of how my coolant is set up it will be great.
i found the map of how the vaccum is setup, so i dont need that. maybe a description of where the coolant goes. thanx
PS i have a 87 base with a 88 turbo setup. thanx
#3
hey i just joined 2 day. your best bet would be to get a rx7 manual. i got one and it has pics and diagrams and tells you how to build it bouth ways. just fallow start to finish its not that hard. you could always tade pictures an go to a macanic u know.
#5
Rpm abuser
Thread Starter
Join Date: Oct 2003
Location: New Port Richey, FL
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
bump, okay can somone post a pic of what there throttle body is hooked up to hose wise, and where they go, and what the firewall hoses go to. thanx.
#6
Banned. I got OWNED!!!
Join Date: Nov 2002
Location: San Jose, CA
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
I think the tubes you're talking about are the metal tubes that attach to the engine....i think they are are for the heater tho.......I removed them when I took out my heater core and all that good stuff under the dash. I am not familiar with the other questions....I cannot get a mental picture......can you take an actual picture? go here they are a bit more detailed. http://www.teamfc3s.org/main/factory...ual/1989_1991/
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM