Turbo Oil Tube Seal
Rotary Enthusiast
Joined: Feb 2001
Posts: 898
Likes: 0
From: Right Here!
Is it a gasket? If it is, I would go to Schucks and get some gasket making material and make my own.
If it is leaking in the same spot as mine is, you have to connect that tube while the turbo is off. If you don't do it then, it is VERY hard to get to.
If it is leaking in the same spot as mine is, you have to connect that tube while the turbo is off. If you don't do it then, it is VERY hard to get to.
Learn to swim.
Joined: Jul 2001
Posts: 1,301
Likes: 0
From: Mobile,AL
I just replaced this gasket. $2.40 from mazda dealer. It is a pain to get to but you don't have to take the turbo off. Just everything above the turbo. I replaced my gasket and it still leaks so I'm going to order both feed and return lines and replace them so I don't have to worry about it again.
Good luck,
Mike
Good luck,
Mike
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM