Hey guys, the only thing that has been changed on my T2 was hooking up the acv and now all of a sudden it struggles starting:
I turn it over and it struggles a bit then starts but idles roughly, if i give it some gas it will backfire and push through and i hold it at 3k rpm for a second then it will idle just fine! if dont push through and get it to 3k rpm it will sputter a bit, then die and i have to deflood it to get it to start...

seems like too much fuel? any ideas?

 

ok, so im going to start with getting the injectors flo'd and replacing the pellet on my thermowax valve and go from there..