Tranny question
Thread Starter
Junior Member
Joined: May 2006
Posts: 16
Likes: 0
From: Tampa
Tranny question
Hey quick qeustion people...my Flywheel is F'ed...the threads for the bolts were just jacked up and cross threaded 2 hell. I was just going to buy another flywheel...and there were some questions about the flywheel itself...what i have sitting in the car is a S5 N/A block in a S4 SE...the flywheel itself has the nipples on it 2 line it up with the clutch...is that a S5 fly wheel or S4 ?? And sense Iam using an S4 Tranny should i do anything else 2 the Flywheel that i purchase ?? Or will i have a problem running an S5 flywheel with an S4 tranny?
Seduced by the DARK SIDE
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
The clutch is interchangable, BUT the cast in counterweight is different.
The flywheel counterweight must balance the rotors weight.
Unless your S5 block was built with S4 rotors, you will need an S5 Flywheel.
The flywheel counterweight must balance the rotors weight.
Unless your S5 block was built with S4 rotors, you will need an S5 Flywheel.
Thread Starter
Junior Member
Joined: May 2006
Posts: 16
Likes: 0
From: Tampa
Originally Posted by SureShot
The clutch is interchangable, BUT the cast in counterweight is different.
The flywheel counterweight must balance the rotors weight.
Unless your S5 block was built with S4 rotors, you will need an S5 Flywheel.
The flywheel counterweight must balance the rotors weight.
Unless your S5 block was built with S4 rotors, you will need an S5 Flywheel.
Thread
Thread Starter
Forum
Replies
Last Post