tranny noise
#1
Newbie
Thread Starter
Join Date: Jan 2005
Location: milford de
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
tranny noise
ive gotta 88 t2 my tranny shifts very smoothly but my question is when the cars in neutral theres a slight whining sound but when i push in the clutch it goes away anyone ever have this problem, if so whats the fix?
#2
omae mo na!
Join Date: Nov 2004
Location: NEW JERSEY
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
throwout bearing thats what my problem was too
until the clutch went
as far as i can tell you, the fix is to replace the throwout bearing
while your in there replace the pilot, clutch plate, pressure plate, etc
until the clutch went
as far as i can tell you, the fix is to replace the throwout bearing
while your in there replace the pilot, clutch plate, pressure plate, etc
#3
Yes, that is my name.
Join Date: Nov 2004
Location: Santa Cruz Mtns
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
This has been covered reciently. It might be signs of your bearings going out. Search the threads for "tranny noise" or "Transmission noise." You can also find great info for troubleshooting exactly what this info is by looking at the FSM. You can download a copy of the FSM for your particular year at www.iluvmyrx7.com
Don't forget to read the FAQ and search, lest you get flamed by old-timers.
sleejay, the way I understood it is, if it makes noise with the clutch pedal pressed, it's the throughout bearing, if the clutch is engaged, it's one of the transmission bearings.
Don't forget to read the FAQ and search, lest you get flamed by old-timers.
sleejay, the way I understood it is, if it makes noise with the clutch pedal pressed, it's the throughout bearing, if the clutch is engaged, it's one of the transmission bearings.
#6
bone stock vert
Join Date: Nov 2004
Location: granbury Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Shop says line from slave cyl to clutch fork is not letting it release? if that is not fix then tranny input shaft bearing, lets hope the deterotating line or slave cyl is the problem, I am not ready to change the tranny or the inputshaft bearing.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post