TPS- WHeres it at, and what does it look like for an S4 N/A. Also, can you use one from a N/A s5 in an S4? Picture of Location please.

Thanks-
Ian

 

As far as I know you cannot swap series, the S5 has 6 wires and 2 prongs, the S4 has 3 wires and 1 prong. The clips do not match to connect it all up properly.

 

The TPS is located on the side of the throttle body facing the front of the car. Little black box with a plunger. The S5 and S4 TPS modules are not DIRECTLY interchangeable.

 

Thank You, I'll try to find an S4 to part out then.

 

The S5 has two sensors (Plungers) because it has electric OMP (S4 is mechanical and only has 1).

 

So a TII TPS S4 would swap with a NA S4 one and so forth? It is series specific not aspiration-specific? That is how I read this. Right?

 

Wow, This is resurrected!

If I'm right(I believe I am) the are series specific, not so sure about model, but I think they are.
Anyway, If you need one, I have one for an S4 N/A, there are also many in the for sale section.

How I found out, was I read, and just kinda screwed around and found it, and figured out how to set it, etc.

 

The TII/NA ones are interchangeable (IIRC)

 

Thanks for answering my question!
Sorry to see your 10AE crumpled......sh*t happens! At least nobody was hurt!