2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Touble starting

Thread Tools
 
Search this Thread
 
Old 07-26-03, 06:01 PM
  #1  
Junior Member

Thread Starter
 
Join Date: Jul 2003
Location: Butler PA
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Angry Touble starting

I have a 1990 RX-7 GTU and it doesnt wanna start changed the injectors then it started right up! then it did the 3k rev and as it was decending it died. Started it again ideled rough then died started again and it got to 1 and died now it turns but will not start. Can some 1 please Help me! my email is DJSRX7GTU1990@yahoo.com
Old 07-26-03, 06:35 PM
  #2  
fire from MY tailpipe!

iTrader: (5)
 
xfeastonarsex's Avatar
 
Join Date: Jun 2002
Location: Cincinnati, Oh
Posts: 1,204
Likes: 0
Received 1 Like on 1 Post
Did it run ok before the injector change?
Old 07-26-03, 07:27 PM
  #3  
Junior Member

Thread Starter
 
Join Date: Jul 2003
Location: Butler PA
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
no it would just keep fooding
Old 07-26-03, 07:28 PM
  #4  
Junior Member

Thread Starter
 
Join Date: Jul 2003
Location: Butler PA
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
flooding*
Old 07-26-03, 07:38 PM
  #5  
Eat Rice Don't Drive it.

iTrader: (3)
 
1987RX7guy's Avatar
 
Join Date: Nov 2002
Location: Laredo, Tx
Posts: 12,752
Likes: 0
Received 1 Like on 1 Post
Have you checked for a vac leak?
Old 07-26-03, 08:57 PM
  #6  
Junior Member

Thread Starter
 
Join Date: Jul 2003
Location: Butler PA
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
yes ive checked them all went to napa and got the clamps for every hose even the 1's that didnt have 1 to begin with
Old 07-26-03, 09:09 PM
  #7  
Eat Rice Don't Drive it.

iTrader: (3)
 
1987RX7guy's Avatar
 
Join Date: Nov 2002
Location: Laredo, Tx
Posts: 12,752
Likes: 0
Received 1 Like on 1 Post
did you use a new gasket for the manifold?
Old 07-26-03, 09:17 PM
  #8  
Junior Member

Thread Starter
 
Join Date: Jul 2003
Location: Butler PA
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
yes i used a new 1 for both the top manafold and the lower manfold
Old 07-28-03, 04:13 PM
  #9  
Junior Member

Thread Starter
 
Join Date: Jul 2003
Location: Butler PA
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
i changed the plugs today and it ran but now that i have done that it stays runnin but as soon as i let off the gas it dies and it dont wanna start when the motor gets hot ALSO my thermostat and oil pressure gauge are NOT working PLease help
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZacMan
Build Threads
4
09-19-15 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
whinin
New Member RX-7 Technical
10
09-05-15 11:52 PM



Quick Reply: Touble starting



All times are GMT -5. The time now is 06:33 PM.