TMIC - JDM vs ASPEC
10-30-03, 12:46 AM
#1
Haven't we ALL heard this
Thread Starter
TMIC - JDM vs ASPEC
I have heard there are differences. This is what I have gathered from searching.
1. JDM - There is no brazed on pipe on the back for the AWS.
2. JDM - Core is bigger.
Question. How much bigger?
James
1. JDM - There is no brazed on pipe on the back for the AWS.
2. JDM - Core is bigger.
Question. How much bigger?
James
10-30-03, 01:35 AM
#2
White Comet
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
Ive compared the two cores side by side and ive seen absolutely no difference other then the plate. The core & inlets were the same size on my S4 jdm & usdm i/c's.
10-30-03, 02:20 AM
#3
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Other than the label (see my avatar), there is absolutely no difference between US-spec and J-spec intercoolers.
There are differences between the S4 and S5 intercoolers. The S5 flows ~10% better due to slightly larger internal passages.
There are differences between the S4 and S5 intercoolers. The S5 flows ~10% better due to slightly larger internal passages.
10-31-03, 08:06 PM
#5
Lives on the Forum
Yeah, the core difference is not true. There is differences in the # of fittings on the rear corner of the IC due to bypass solenoids. All US-spec IC's come with two fittings - the J-Spec ones either come with just one or NONE of those fittings.
-Ted
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
distr0
Canadian Forum
3
10-07-15 08:17 AM