2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Tire Size/Fitment Question

Thread Tools
 
Search this Thread
 
Old Jul 23, 2010 | 12:51 PM
  #1  
LunchboxCritter's Avatar
Thread Starter
Disco Biscuit
Tenured Member 10 Years
iTrader: (9)
 
Joined: Dec 2006
Posts: 755
Likes: 1
From: Florida
KY Tire Size/Fitment Question

I'm looking at a staggered set of wheels, and I am wondering what is the widest tire sizes that I can use without rubbing.

My car is a 91 Jspec TII swapped 5 lug, tokico blues, eibach springs. The wheels I'm looking at are 38mm offset and 18x8 (front), and 18x9 (rear).

If at all possible; I'd like to not have stretched tires on them. Any suggestions, experience to share would be greatly appreciated.

Thanks,
Reply
Old Jul 24, 2010 | 09:26 AM
  #2  
jdmsuper7's Avatar
Looks ahead!
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jan 2004
Posts: 1,079
Likes: 1
From: Ephrata, PA
The front will be very close at that offset. I'd try to go to a +30 or +32 or get yourself a 5mm spacer. (All of this is assuming you will run a 225 tire up there, a 205 will probably clear the spring just fine)
Reply
Old Jul 24, 2010 | 10:21 AM
  #3  
LunchboxCritter's Avatar
Thread Starter
Disco Biscuit
Tenured Member 10 Years
iTrader: (9)
 
Joined: Dec 2006
Posts: 755
Likes: 1
From: Florida
I was thinking 215/40 in the front (slight stretch I can stand, but the ghetto lip sticking out I do not care for), and either 235/40 or 245/35 in the rear. I wonder if they would clear the springs and not get in the fenders. Would like to avoid having to roll the fenders if at all possible, I'm not sentimental about them, so if it must be done then I'm hype.
Reply
Old Jul 24, 2010 | 09:05 PM
  #4  
LunchboxCritter's Avatar
Thread Starter
Disco Biscuit
Tenured Member 10 Years
iTrader: (9)
 
Joined: Dec 2006
Posts: 755
Likes: 1
From: Florida
Any more suggestions, pictures, examples?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Barrman
New Member RX-7 Technical
2
Sep 8, 2015 03:25 PM
mazdaverx713b
1st Generation Specific (1979-1985)
19
Aug 29, 2015 12:30 PM




All times are GMT -5. The time now is 03:43 PM.