2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

TII swap

Thread Tools
 
Search this Thread
 
Old May 2, 2006 | 11:20 AM
  #1  
rotaryracer2005's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 75
Likes: 0
From: Smokey Point, Washington
TII swap

last night i thought we were complete with my tII swap with my 89 rx7. fuel pump is on, lights, etc. tuen the key.. its turning, turning. but my buddy said he doesnt feel the injectors firing. plus we got really good spark.. any suggestions?
Reply
Old May 2, 2006 | 11:45 AM
  #2  
classicauto's Avatar
Crash Auto?Fix Auto.
Tenured Member 15 Years
iTrader: (3)
 
Joined: May 2003
Posts: 7,831
Likes: 2
From: Hagersville Ontario
how did your buddy "feel" the injectors not firing? the force?

pull the plugs, see if they're wet or not
Reply
Old May 2, 2006 | 11:49 AM
  #3  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
Put out a buck fifty for a can of starter fluid.

Pull the plug off the fuel pump.

Spray into the air filter for two maybe three seconds.

Start the car. If it starts for a moment, I'd say you've a fuel hose problem at the engine attach points.

IF it does not start after several spray tries, it's something else. Usually if you have spark it follow that the fuel injectors will work, because both items get their timing from the cas. Got one, should have the other.

Starter fluid and disabling the fuel pump. Do NOT pulll the EGI COMP or EGI INJ to do this.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
befarrer
Old School and Other Rotary
2
Oct 5, 2015 03:30 AM
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM
acha3
2nd Generation Specific (1986-1992)
7
Sep 6, 2015 08:14 AM




All times are GMT -5. The time now is 09:52 PM.