Sergei The Saint

Starter dead, need to replace, have a S4 TII that had a dead engine, sold the engine core, have a perfectly good S4 TII starter.

Searched, I found this https://www.rx7club.com/showthread.p...ter+S5+s4+swap which answers the question of the flywheel as of S4 and S5, but doesnt say if a turbo S4 and S5 starter will work for either.


Cliffs:

TII S5 starter died

Have good TII S4 starter

Will it work?!


Thanks

Sergei The Saint

Ok found this

Found this, can anyone verify as I'm getting mixed responses and I dont really want to go exchange the starter in the friggin cold to find out it doesnt work in the end. Anyone, greatly appreciated.

Thank you,

arghx

iTrader: (3)

I would think that the only way it wouldn't work would be if the splines don't mate up.

Megabridge

iTrader: (2)

Yes, a turbo 2 starter fits S-4 or S-5.

Sergei The Saint

thank you guys

gxl90rx7

iTrader: (1)

yep all n/a starters are the same, all turbo starters are the same. however all starter solenoids are the same between turbo and n/a, so you may want to check to see i fi t is the solenoid that is stuck. if it is you may just want to swap solenoids

sub9lulu

iTrader: (7)

auto starters with on the t2 as well, and they are stronger

HOZZMANRX7

iTrader: (43)

NA Auto starters are different than NA Manual starters. The Solenoid is placed differently.

However, Solenoid placement on an NA Auto starter is the same as a TII starter. The Auto may indeed be stronger as the motor housing is a bit longer.