Thinking about trimming my clutch fan -.-
#1
FC3S
Thread Starter
Join Date: Sep 2006
Location: I come from a land downunder
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Thinking about trimming my clutch fan -.-
Alright so here's the thing, installing this new turbo has been a pain in the *** for a bolt in kit the amount of custom work i have had to do is stupid, that aside now the turbo is in, the fan is about 20mm from the end of the turbo, Now I can but a thermo fan if i have to, but like the stock fan. If i trim a little bit off the edge of all the fan blades and cut room for the air filter in the side of the fan shroud, will this work. Or should i just buy a fan
Here's a pic
Here's a pic
#2
Slowpoke
iTrader: (3)
maybe theirs a metal fan you can upgrade to with thinner blades? i dunno.
I went to a efan and the space saving room makes working on the car soo much easier. You have a serious reason to go to efan now, clearance issues, that is if you feel comfortable with going efan *as they tend to get mixed reviews by pro-clutch fan guys and pro- efan guys
I went to a efan and the space saving room makes working on the car soo much easier. You have a serious reason to go to efan now, clearance issues, that is if you feel comfortable with going efan *as they tend to get mixed reviews by pro-clutch fan guys and pro- efan guys
#6
FC3S
Thread Starter
Join Date: Sep 2006
Location: I come from a land downunder
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Guess im going shopping after work tomorrow. Am i gonna run into issues with this bigger turbo and the stock radiator? Was gonna possibly upgrade once i can save up some more money
#7
Slowpoke
iTrader: (3)
heres my setup
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/hyperteks-budget-elec-fan-install-811725/
the taurus fan is a popular choice, as well as gm fans like the one from the fiero gt as mine is.
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/hyperteks-budget-elec-fan-install-811725/
the taurus fan is a popular choice, as well as gm fans like the one from the fiero gt as mine is.
Trending Topics
#8
FC3S
Thread Starter
Join Date: Sep 2006
Location: I come from a land downunder
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Yeah im probably just going to pick up a brand new fan from one of the local rice stores. I'm over in aus so we dont have any taurus or fiero gt's lol
#11
FC3S
Thread Starter
Join Date: Sep 2006
Location: I come from a land downunder
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Yeah just read up aaron cakes write up says 2500 cfm is sufficient. I got some carbon left over from another project so i might make up a carbon shroud when i get some spare time
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM