Testing injectors
#1
Nipples
Thread Starter
Join Date: Mar 2004
Location: San Jose, CA
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Testing injectors
Do you guys know how I should go about testing injectors?
is there some way i could have the ignition on so the car would shoot gas out of the injectors so i could see how well/how poorly they are spraying?
thanks,
grant
is there some way i could have the ignition on so the car would shoot gas out of the injectors so i could see how well/how poorly they are spraying?
thanks,
grant
#2
Open up! Search Warrant!
Join Date: May 2002
Location: Kicking down doors in a neighborhood near you
Posts: 3,838
Likes: 0
Received 2 Likes
on
2 Posts
the factory service manual shows how to hook them up so you can measure how much they put out in a give time. It has you connect a hose to the end and run it into a cup or something. You won't be able to see the spray pattern with the tube hooked up, but if it doesn't spray right, then the measurement will more than likely be lower then its supposed to be.
you can download the manual free at www.fc3s.org
you can download the manual free at www.fc3s.org
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM