testing the ignition switch?
10-10-05, 05:22 PM
#1
Senior Member
Thread Starter
Join Date: May 2003
Location: In a house
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
testing the ignition switch?
I have had a few starting related problems. I fixed a few things but now I think my ignition switch has kaput.
At first, on every 3rd key turn, the car would crank. The first 2 key turns in the pattern did absolutely nothing accept drain a lot of juice and dim the lights. I took it to a shop and they fixed it temporarily.
Now, the car just rapid cranks and the lights flicker at the same time. The cranks are not full and complete as if it would normally. I will hopefully get a video up tonight if I can find some free time.
Mainly I want to test the ignition switch. I'm working on getting the FSM up, but the library computers here not transfering all the PDF data for me to view.
At first, on every 3rd key turn, the car would crank. The first 2 key turns in the pattern did absolutely nothing accept drain a lot of juice and dim the lights. I took it to a shop and they fixed it temporarily.
Now, the car just rapid cranks and the lights flicker at the same time. The cranks are not full and complete as if it would normally. I will hopefully get a video up tonight if I can find some free time.
Mainly I want to test the ignition switch. I'm working on getting the FSM up, but the library computers here not transfering all the PDF data for me to view.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM