andresj

iTrader: (8)

Hey so before i had the accident with my car all my gauges worked. When I did the swap to the new shell now none of these work. What should I look for? I hope I can get these things done today! Would there be a problem if my original car was and had S4 Sport model cluster and all the things I transferred to has a S4 TurboII cluster?

finishline

iTrader: (13)

wow, that's weird. good luck with that man.

rotary_bünta

iTrader: (3)

no trying to thread jack but outta now where my speed o meter and milage stop working. Tach and oil and batt all work.. very odd.

andresj

iTrader: (8)

I think yours is on the transmission I don't know though I hope someone could help soon

The CzAR

iTrader: (16)

Your meter fuse is probably blown. It controls the instrument cluster. First determine if it's blown, then you can start to pinpoint what's causing it to blow.

andresj

iTrader: (8)

Cool thank you I will go check that out right now. What if the meter fuse is not blown?

andresj

iTrader: (8)

How do I know which one is the meter fuse my car doesn't have that black lid with the sticker on it to show you which fuse is which.

88redturbo2

ita going to be third from bottom and third row, 7.5amp

scroll down the the fuse panel picture: https://www.rx7club.com/showthread.p...72#post5131072

andresj

iTrader: (8)

cool thanks. it was blown

The CzAR

iTrader: (16)

replace it and see how long it lasts. pay close attention to see if it blows when you shift into 5th or reverse. those two switches are tied into the meter fuse and can be the culprit sometimes. A bad reverse switch on my car kept blowing the meter fuse.