taking off door handle
Thread Starter
my fc broke
Joined: Feb 2003
Posts: 2,231
Likes: 0
From: rohnert park,CA/ bay area
taking off door handle
i was wondering what you have to do to take off the door handle. i took the door panel off and it looked very compact like you have to take off the window regulator or something.anbyody know an easier way?
-Neil
-Neil
What R U thinking self?
Joined: Mar 2002
Posts: 2,333
Likes: 0
From: Stockton, CA
should be a 10 MM on the right hand side, get a 6 in extention. tak eout the right bolt with the windows all the way down. Then roll the windows all the way up, and there is a cutout in the glass to get to the left side 10 MM, then pull it out a litttle, and disconnect the jobber.s
I am trying to recall for sure, but I think there is a plastic plug on the outside, that covers the hole to the left (from the inside) nut.
It's really easier than it looks at first
-Robert
I am trying to recall for sure, but I think there is a plastic plug on the outside, that covers the hole to the left (from the inside) nut.
It's really easier than it looks at first
-Robert
Seduced by the DARK SIDE
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
The outer fastener is a nut on a stud into the handle casting, but a bolt will work.
When I first picked up the turbo, both nuts on the driver's door handle had simply fallen off.
When I first picked up the turbo, both nuts on the driver's door handle had simply fallen off.
