taking off door handle
i was wondering what you have to do to take off the door handle. i took the door panel off and it looked very compact like you have to take off the window regulator or something.anbyody know an easier way?
-Neil |
should be a 10 MM on the right hand side, get a 6 in extention. tak eout the right bolt with the windows all the way down. Then roll the windows all the way up, and there is a cutout in the glass to get to the left side 10 MM, then pull it out a litttle, and disconnect the jobber.s
I am trying to recall for sure, but I think there is a plastic plug on the outside, that covers the hole to the left (from the inside) nut. It's really easier than it looks at first -Robert |
i know that im missing a bolt on one side of the handle. im hoping it didnt break off beacuse i dont dont want to get a new one resprayed
|
The outer fastener is a nut on a stud into the handle casting, but a bolt will work.
When I first picked up the turbo, both nuts on the driver's door handle had simply fallen off. |
All times are GMT -5. The time now is 04:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands