t2 tranny in NA?
#1
777** The Anti-rice
Thread Starter
Join Date: Sep 2002
Location: Seattle, WA
Posts: 2,100
Likes: 0
Received 0 Likes
on
0 Posts
t2 tranny in NA?
if i get a T2 tranny, what would i need to do to adapt it to my NA? would i need new slave/master? driveshaft? sorry if this has been covered before, i just couldnt find it with search.
#3
wtf's a piston
Join Date: Mar 2004
Location: Englewood, FL
Posts: 1,717
Likes: 0
Received 0 Likes
on
0 Posts
ok, this is what you need. T2 tranny, speed sensors, T2 driveshaft, T2 clutch kit, rear differential, half-shafts, T2 starter, YOU USE ORIGINAL FLYWHEEL, not T2. And master/slave cylinder. Or you can just get the driveshaft cut to the right length, get the T2 starter, master/slave, T2 speed sensor, and use the rest of the original drivetrain. Good luck.
Gerbraldy
Gerbraldy
Last edited by gerbraldy; 04-11-04 at 07:51 AM.
#4
Do a barrel roll!
iTrader: (4)
Originally posted by gerbraldy
ok, this is what you need. T2 tranny, speed sensors, T2 driveshaft, T2 clutch kit, rear differential, half-shafts, T2 starter, YOU USE ORIGINAL FLYWHEEL, not T2. And master/slave cylinder. Or you can just get the driveshaft cut to the right length, get the T2 starter, master/slave, T2 speed sensor, and use the rest of the original drivetrain. Good luck.
Gerbraldy
ok, this is what you need. T2 tranny, speed sensors, T2 driveshaft, T2 clutch kit, rear differential, half-shafts, T2 starter, YOU USE ORIGINAL FLYWHEEL, not T2. And master/slave cylinder. Or you can just get the driveshaft cut to the right length, get the T2 starter, master/slave, T2 speed sensor, and use the rest of the original drivetrain. Good luck.
Gerbraldy
#5
seven-less
Join Date: Apr 2003
Location: city of houston.... y0!
Posts: 2,082
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Rxmfn7
Not entirely true.. You need a T2 flywheel also, of the same series engine. Along with T2 starter (or auto N/A starter will work) . I believe mazdatrix sells a T2 trans -> N/A rear end driveshaft, might have to call them up and ask.
Not entirely true.. You need a T2 flywheel also, of the same series engine. Along with T2 starter (or auto N/A starter will work) . I believe mazdatrix sells a T2 trans -> N/A rear end driveshaft, might have to call them up and ask.
Thread
Thread Starter
Forum
Replies
Last Post