I finnaly got my pictures developed of the porting ive been doing.

The first is of one of my primary ports



and this is my fav pictures of the secondary bridge




Both are not completly finished. I need to buy some long shanked sanding drum's to clean up the inner most parts of the runner, and the bridge has some sharp edges still, but its comming along

-Jacob

 

What tools are you using? Air die grinder with stones, carbide bits?

 

Those primaries are aweful small. But they're not TII primaries...NA intermediate plate w/ TII end plates?

 

Im using a dremel with a carbide bit, and some random sanding stone to clean stuff up

and yeah, i know the primary's are pretty small, when i started i didnt have a spare center iron to use as a backup if i destoyed this one so i went rather conservative.

That is infact a tii center iron though. the port shape is a cross between the stock and racingbeats bridgeport templets look like, and then i widended it a bit

i could alway's go larger with it now that i have a backup though..

aaron, your doing a bridgeport project arn't you? any images of you work? id be intreasted to see what you have lined up

-Jacob

 

I have a good amount of pictures of my bridgeporting progress, but want to post them all at once when the ports are done...I spend so much time working on other people's cars that I don't have a lot left for mine, so the progress is slow...