corbo

hey everyone, i was just wondering how much trouble it would take to swap a manual tranny with my auto? if anyone has done this, i have a 87 gxl, and advice would be greatly appriciated!
thanks

RyosukeD

iTrader: (2)

It can be done. If you got the money/time/tools.

veedubbed

Take a long weekend and do it.


Make sure to read up before and so you will know exactly what to expect.

corbo

ok thanks guys

danegerous

iTrader: (10)

Theres numerous right ups and even dedicated sections in the 2nd Gen faq. Use it son!

corbo

well no i know that/
i was just makin sure i wasnt missin anything, any tricks or 'easy' ways to do this..
advice is all i was askin for

thanks tho

Michaelangelofb

youll prob have to do:
driveshaft
tranny (duh)
but you might have to change the diff or the spline count on that side of the shaft.

just my guess

veedubbed

Pedal cluster
Probably have to jump some wires (or change the harness), and change the ECU, I don't know if the ECU's are different in these cars between auto and manual trans.

Aaron Cake

iTrader: (1)

And the front counterweight unless you go with an aftermarket light flywheel.

I think maybe the starter as well? And all the clutch components.

Either way there is an archived write up that covers this in great detail.

blwn rtr 89'

iTrader: (5)

trans.
manual starter motor
flywheel
clutch
counterweight
man. pedel box
slave cylinder
throw out bearing
propeller shaft
mounting bracket
trans mounts
alignment tool
32mm socket
puller
1.5" hole saw
eletrical tape
gear oil
shift boot
****

off the top of my head thats it, you will need a drill as well, you dont need the ecu to complete the swap but you will throw an ses light with out the proper ecu( or stand alone) due to the auto not being hooked up. if you buyeverything first, it should take you about 15-18 hours to complete if your not a moron.