2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

sunroof and window problems, please help

Thread Tools
 
Search this Thread
 
Old 06-02-02, 07:26 PM
  #1  
Livin loud like TIMMAAAYY

Thread Starter
 
RiceRocket's Avatar
 
Join Date: May 2002
Location: Roper, North Carolina
Posts: 1,451
Likes: 0
Received 0 Likes on 0 Posts
sunroof and window problems, please help

i have two problems:

first, the passenger side power window won't go up sometimes. could it be the switch or the motor? most of the time i can wait a little while and it will work.

second, my sunroof will not open from the closed position on its own power. i have to push the button to open it and help it with my hand, then i have to roll it back with an allen wrench about 2 inches before the motor can open it


can anyoine help me diagnose the problem(s)?
Old 06-02-02, 08:49 PM
  #2  
Senior Member

 
crasher2's Avatar
 
Join Date: Feb 2002
Location: South Carolina
Posts: 467
Likes: 0
Received 0 Likes on 0 Posts
you know I have the same problem with my sunroof too, I was just going to take it out and clean the **** out of tracks and lube it up again
Old 06-02-02, 08:51 PM
  #3  
knowledge junkie

 
vaughnc's Avatar
 
Join Date: Mar 2001
Location: Atlanta, GA
Posts: 5,595
Likes: 0
Received 6 Likes on 4 Posts
first)
hmm... need more info. Do you hear the motor running. Is the switch goofy, etc..

second)
sunroof tracks & mechanisms need cleaning & lubing.

Do a search for "sunroof" in the "2nd gen" and "2nd gen archive" sections for more details.
Old 06-02-02, 10:00 PM
  #4  
Livin loud like TIMMAAAYY

Thread Starter
 
RiceRocket's Avatar
 
Join Date: May 2002
Location: Roper, North Carolina
Posts: 1,451
Likes: 0
Received 0 Likes on 0 Posts
for the windows, all i hear is the click of the switch, and then a few minutes of waiting allow me to roll up the windows. sometime 30 seconds, sometimes 10 minutes


i have already lubed and cleaned all of the tracks and everything for the sunroof. could it be the motor or a solenoid or anything?
Old 06-02-02, 10:20 PM
  #5  
Junior Member

 
skotter's Avatar
 
Join Date: Mar 2001
Location: Madison Wisconsin
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Easy Fix

I just fixed both the switches on my 87 GXL. Pop the switches out and disconnect them. Take both inside and put some paper down on the table. Take them apart really slow trying not to break the plastic. You'll see that there are contacts and a little thin metal piece that contacts them. Both of the little metal pieces will fall out when you take them apart. Take a small flat-head screwdriver and scrape the contacts clean. They will be charred black probably. Put them back together and plug them back in. I also bought some silicone spray and sprayed the track down the middle of the window and all the black stuff that the edges run through. My windows move up and down super fast now.
Old 06-02-02, 11:01 PM
  #6  
Full Member

 
ggyygg88's Avatar
 
Join Date: Feb 2002
Location: LA
Posts: 147
Likes: 0
Received 0 Likes on 0 Posts
yo guys since were on the subject of widows
i was wodering if its easy
to convert the power windows to manual ones
what parts are needed
will the door look funny with the switch still on them?
how much weight can be taken off?
thanks a lot!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Apoc3D
2nd Generation Specific (1986-1992)
10
09-05-15 10:24 AM



Quick Reply: sunroof and window problems, please help



All times are GMT -5. The time now is 12:10 PM.