stupid question here
#1
Junior Member
Thread Starter
Join Date: Feb 2003
Location: kalamazoo, MI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
stupid question here
this is going to sounds stupid as hell. i have owned 2 rx-7's and still am learning. anyway could somwone please tell me exactly what the ECU is?? what it does ??? where it is??? why must it be replaced??? thanks nick
#2
Theres no stupid questions, only stupid people
The ECU (Engine control unit) is what runs your engine. It tells the injectors when to fire, the sparkplugs when to spark, the position of the throttle, etc. It is located under the passenger footwell. Peel back the carpet and remove the metal gaurd on top of it.
I see no reason it would need to be replaced unless you are swapping engines, or upgrading your car, in which case you would buy an aftermarket unit so you could program it how you prefer.
The ECU (Engine control unit) is what runs your engine. It tells the injectors when to fire, the sparkplugs when to spark, the position of the throttle, etc. It is located under the passenger footwell. Peel back the carpet and remove the metal gaurd on top of it.
I see no reason it would need to be replaced unless you are swapping engines, or upgrading your car, in which case you would buy an aftermarket unit so you could program it how you prefer.
#4
Originally posted by 1987RX7guy
Hey areExseven
I was looking at the RX7.com site and they have the e6k and I want to get it towards the fall of this year and would like to know what parts I would need to order.
Hey areExseven
I was looking at the RX7.com site and they have the e6k and I want to get it towards the fall of this year and would like to know what parts I would need to order.
With the E6k, I don't think you need anything though. I assume it comes with a flying lead harness (might wanna check on that), which allows you to wire it using the stock connectors and hacking up the wire a bit. If not, http://www.k2rd.com sells an adapter for the E6k which converts you stock wiring harness to work with the E6k without having to rewire anything. You will want some way to program it, since the E6k doesnt have a handheld unit. You will need a laptop if you wanna do it in the car, or a PC for outside of the car use.
Now don't quote me on any of that, I still use the stock ECU, and plan to buy a microtech later, so I am not by any means sure of what I said.
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM