2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

stock security system

Thread Tools
 
Search this Thread
 
Old Dec 31, 2003 | 09:54 AM
  #1  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 142
Likes: 0
From: abilene(shithole)texas
stock security system

how do i turn it off? like when its already going off?
Reply
Old Dec 31, 2003 | 10:00 AM
  #2  
downwinddave's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 342
Likes: 0
From: Treasure Island, FL
Is is going off now?

Key in driver door.
Reply
Old Dec 31, 2003 | 10:05 AM
  #3  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 142
Likes: 0
From: abilene(shithole)texas
i disconected the batt for now, butdo i have to lock it with the key then unlock it? thats how my moms works
Reply
Old Dec 31, 2003 | 10:15 AM
  #4  
Ocelot's Avatar
Y00s a h000
Tenured Member 10 Years
 
Joined: Jul 2003
Posts: 1,913
Likes: 0
From: Central NJ
Push down the lock from the inside, you'll hear a beep, then close the door while holding the handle up and it will be activated. To get back in, just turn the key.
Reply
Old Dec 31, 2003 | 10:37 AM
  #5  
truespin88's Avatar
truespin, not tirespin
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 655
Likes: 0
From: Belpre, Ohio
Sometimes it'll go off randomly. The door switch might be bad, so you can always just unlock the hatch with the key. That's how I used to shut mine off, before I got tired of it and just removed the computer for it.
Reply
Old Dec 31, 2003 | 11:38 AM
  #6  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 142
Likes: 0
From: abilene(shithole)texas
hmmmmm, where is this computer you speak of? i may wish to remove it also
Reply
Old Dec 31, 2003 | 11:47 AM
  #7  
truespin88's Avatar
truespin, not tirespin
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 655
Likes: 0
From: Belpre, Ohio
I think it's held by 3 screws, but it's inside a cover that's held by 5. If you've got a small Phillips screwdriver (a stubby) you can do this in like 5 minutes.
It's that panel you have to remove to change your passenger side front speaker. It's the little box on the left with the wires coming out that are wrapped in black stuff. I'll post the numbers on the computer in just a sec.
Reply
Old Dec 31, 2003 | 11:50 AM
  #8  
truespin88's Avatar
truespin, not tirespin
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 655
Likes: 0
From: Belpre, Ohio
I'd say it's a 2x4 silver box with three screws, mounted at some wicked angle.
Mine says 8J21 in black, and FB67 67 790 is relieved into the box, also says IMASEN JAPAN on it.

Just remove that panel, unscrew the screws holding the control unit, unplug it, and place it in that bin of stuff that will go with the car if you ever sell it.
Reply
Old Dec 31, 2003 | 11:56 AM
  #9  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 142
Likes: 0
From: abilene(shithole)texas
im on it, damn security system
Reply
Old Dec 31, 2003 | 12:05 PM
  #10  
truespin88's Avatar
truespin, not tirespin
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 655
Likes: 0
From: Belpre, Ohio
amen to that, brother.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM




All times are GMT -5. The time now is 02:21 PM.