stock air box mod
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
stock air box mod
ok everyone has there idea of what will make the stock air box perform better well I have read over all the ideas of cutting holes in the lid, or cutting holes in the tunnel inside the air lid (the tunnel form the snorkle to the middle of the air lid)
here is what some people do:
here is what I did
I removed the divider in the opening of the lid, and I removed the actual "tunnel" all together so the air comming from the snorkle will travel right into the filter and all over.
I did'nt want any hot engien bay air if possible so I just left the exterior of the lid untouched..
let me know what u guys think!
***BTW*** I did this a couple weeks ago and I cant say it made a noticable improvement but I do think it does help a bit.
here is what some people do:
here is what I did
I removed the divider in the opening of the lid, and I removed the actual "tunnel" all together so the air comming from the snorkle will travel right into the filter and all over.
I did'nt want any hot engien bay air if possible so I just left the exterior of the lid untouched..
let me know what u guys think!
***BTW*** I did this a couple weeks ago and I cant say it made a noticable improvement but I do think it does help a bit.
Last edited by SpooledupRacing; 10-19-06 at 07:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
JIMMY54
1st Generation Specific (1979-1985)
2
08-12-15 05:40 PM