still cant figure it out
06-06-07, 06:44 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Burque
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
still cant figure it out
Re:
Thanks for the diagram but it didnt help very much. If someone out there could take a look at their series five fuel injector resistor connector and tell me what wires go to what I would be ecstatic. check it,
on the resistor side of the connection with the clip on the bottom on the left two black wires over and under, a white and a sky blue over and under in the middle and on the right a yellow over pink set of wires. I need to know how these connect in relation to the following wires on the harness side: three blue with red stripe, two blue with green stripes and one green with red stripe.
any one with a series 5 could easily help me by taking a quick look. thanks alot!
Thanks for the diagram but it didnt help very much. If someone out there could take a look at their series five fuel injector resistor connector and tell me what wires go to what I would be ecstatic. check it,
on the resistor side of the connection with the clip on the bottom on the left two black wires over and under, a white and a sky blue over and under in the middle and on the right a yellow over pink set of wires. I need to know how these connect in relation to the following wires on the harness side: three blue with red stripe, two blue with green stripes and one green with red stripe.
any one with a series 5 could easily help me by taking a quick look. thanks alot!
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM