steering wheel install help needed
Thread Starter
Professional Lurker
Joined: Feb 2001
Posts: 722
Likes: 0
From: Orlando
steering wheel install help needed
Ok so I bought a sparco steering wheel and momo hub adaptor from a guy and tried to install it today. It looks like it would fit but the turn signal stuff is in the way and the hub wont slide all the way down. Do I have the wrong hub or do I have to remove all of the turn signal crap first? Any writeups on this?
Full Member
Joined: Aug 2002
Posts: 237
Likes: 0
From: Elk Grove, Cali
Momo hub part number is 5705... The Sparco and Momo hubs are interchangable.
I just put in a Momo Race weel and FYI I had to get it aligned becuase the Momo hub can only be installed one way and at least for my car didn't line up so my wheel was about 45 degrees off until I got it adjusted.
I bought mine from http://www.obbnmotorworks.com
I just put in a Momo Race weel and FYI I had to get it aligned becuase the Momo hub can only be installed one way and at least for my car didn't line up so my wheel was about 45 degrees off until I got it adjusted.
I bought mine from http://www.obbnmotorworks.com
Full Member
Joined: Aug 2002
Posts: 237
Likes: 0
From: Elk Grove, Cali
Did a search on Google.com for you.. just typed in Momo and 7715 and this is what comes up..
The 7715 if for Toyotas
Looks like a lot of different ones too..
87-90 Camry
86-93 Celica
89 and newer Colrolla
91-96 Landcruiser
90-91 MR2
92-97 Paseo
87-96 Pickup
90-96 4 Runner
90-98 Tercel
The 7715 if for Toyotas
Looks like a lot of different ones too..
87-90 Camry
86-93 Celica
89 and newer Colrolla
91-96 Landcruiser
90-91 MR2
92-97 Paseo
87-96 Pickup
90-96 4 Runner
90-98 Tercel
It's all good yo
