Steering wander
#1
Full Member
Thread Starter
Join Date: Aug 2002
Location: Mi
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Steering wander
I slid my FC into a curb one day and now my steering is off. The car was completely sideways and both the front and rear wheels hit. I took the car in for an alignment and it still does not steer straight. Sometimes it pulls in either direction. I think I probably bent something but I don't know much about steering. Anybody know a good place to start?
#2
Full Member
Thread Starter
Join Date: Aug 2002
Location: Mi
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
There's a smell of rubber burning when I get out of the car so I don't think one of the wheels is spinning correctly... Could be the rear wheel, it's hard to say.. all the wheels have been balanced and the alignment was corrected as much as possible..
#4
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
did you get a print out of the alignment?? you probably bent some stuff they didn't fix.. they probably just changed it as close as posible (which wont' be much) and gave it back.
#7
Rotary Freak
Join Date: Apr 2002
Location: Boulder, CO
Posts: 1,739
Likes: 0
Received 0 Likes
on
0 Posts
are you a big fatty?
seriously though, if your over like 250 pounds, the alignment has to be adjusted with you in the car, or it won't be correct.
then again, if you weighed that much, you'd probably have a different car.
seriously though, if your over like 250 pounds, the alignment has to be adjusted with you in the car, or it won't be correct.
then again, if you weighed that much, you'd probably have a different car.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
RyanFox
New Member RX-7 Technical
7
09-18-15 09:09 PM