2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

steering sensor issues?

Thread Tools
 
Search this Thread
 
Old 01-06-09, 11:58 AM
  #1  
Junior Member
Thread Starter
 
spktony's Avatar
 
Join Date: Sep 2008
Location: phoenix, az.
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
steering sensor issues?

5-beeps, pause, repeat - in case abnormality of steering sensor signal: Steering sensor is mis-aligned or failed or steering wheel has been improperly installed.


where is the steering sensor? i kinda tooled around underneath the dash yesterday and saw nothing. is it right next to the steering wheel? like behind it? or is it in the engine bay? please help. the 5 beeps are making me want to blow my brains out every time i drive. thanks.
Old 01-06-09, 12:55 PM
  #2  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
The steering wheel attaches to it with the steering column.

Did you swap or change the steering wheel recently?

There are two plastic tabs that stick up from the sensor's bushing. Those must align with the two matching holes in the back of the steering wheel or the aftermarket steering wheel adapter. If you didn't align them, then chances are you crushed the tabs.

With any luck you will be able to take the steering wheel back off, bend the tabs back up and then re-install the steering wheel...However if you really crushed them back, then you will need to replace the bushing.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
stickmantijuana
Microtech
30
04-23-16 06:37 PM
Snoopy FD
Build Threads
25
12-08-15 01:45 PM
befarrer
Microtech
3
08-22-15 05:52 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM



Quick Reply: steering sensor issues?



All times are GMT -5. The time now is 01:43 AM.