2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Starting Problems, with a twist

Thread Tools
 
Search this Thread
 
Old Feb 7, 2004 | 12:02 PM
  #1  
JClem's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 5
Likes: 0
From: NJ
Starting Problems, with a twist

OK I’m new to this so please bear with me. I’ve scanned the 2nd Gen forum and have seen a lot of posts concerning starting/flooding problems but couldn’t find any with the same symptoms.

The car starts and runs fine in any temperature, if it has been sitting for less than an hour or longer than about 4 hours. I can turn off the car without it heating up completely and it will start back up fine. So this doesn’t fit the typical “can’t start” problem. If the car sits for about and hour and a half to about three hours then I have starting problems. The engine cranks/turns over fine but just won’t start. Occasionally I can get it to start by flooring the accelerator, occasionally I can get it to start by pumping the hell out of it, most of the time it just won’t start at all. If I go back to it after about four hours it starts right up.

It’s a rebuilt with about 50K on it, compression was great last time checked. New plugs/wires don’t seem to make a difference.

Any words of wisdom from anyone?
Reply
Old Feb 8, 2004 | 10:06 AM
  #2  
JClem's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 5
Likes: 0
From: NJ
bump
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
Oct 13, 2015 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM




All times are GMT -5. The time now is 09:38 AM.