yesterday we finally got it started, but today it wont even start, we just replaced the fuel pump with a Walbro 190LPH, and we pulled off the spark plugs and cranked it, and a lot of fuel came out, so the motor was flooded, we checked if it was the FPR but there is fuel coming from the fuel return line so taht wasnt it. We're guessing its either the Fuel Injectors but how? the fuel pump isnt too much is it? Or its the ECU, my dad said i mightve gotten it wet, i shot down the underside of the car earlier yesterday so im clueless. Please help !

 

no one can helP?

 

Guess you've got to try the unflooding trick. Make certain you've got spark, pull plugs and egi fuse. Crank the engine to clean out fuel. Put some ATF, Oil, MM, or whatever you prefer (I use ATF) into chambers install plugs, put fuse back in and give it a try. Once you get it running see what happens.

 

haven't tried pulling out the EGI fuse and cranking it like that, and put some oil u say>? i;ll try that

 

wat is causing my motor too flood soo much? i know how to unflood we keep unflooding it but it just floods again after 1-2 cranks.

 

need help on unflooding, ok so i pulled out the EGI Inj fuse and unplugged all the spark plugs and started the unflooding process. my question is how do i get compression back? cuz it seems like its spinning freely, how do i start getting oil in there>? can i just unflood it with WOT? to get oil in or am i wrong need ur answers asap trying to get outta town asap

 

you need to clean your injectors

 

pull em out and clean em or send em iN?